New PIERBURG pump for Flow heaters

There are small changes that have to be taken into consideration. The changes are connected with generations of Flow 5D/B Control Units that are summarized in the table below.

Generation Heater name Control Unit (factory standard) Direct replacement
BINAR Generation BINAR 5S (diesel, 12V) assy.3133 3133->4311->4381
BINAR 5S (diesel, 24V) assy.3108 3108->4306->4388
BINAR 5S (petrol, 12V) assy.3188 3188->4337->4377
1st Flow Generation AUTOTERM Flow 5D, 12V assy.4311 4311->4381
AUTOTERM Flow 5D, 24V assy.4306 4306->4388
AUTOTERM Flow 5B, 12V assy.4337 4337->4377
2nd Flow Generation AUTOTERM Flow 5D, 12V assy.4381*
AUTOTERM Flow 5D, 24V assy.4388
AUTOTERM Flow 5B, 12V assy.4377*

*Only these Control Units work with Pierburg, but they work also with Bosch PAD.

The 2nd Generation of Flows changed the Liquid Pump from Bosch PAD to Pierburg (assy.926).

The Control Units from the BINAR and 1st Generations of Flow heaters use wiring assy.4044.  It is possible to use assy.4044 (and Bosch PAD) for the 2nd Generation as well, but to use the Pierburg liquid pump (that is suitable to 2nd Generation Flows only with voltage 12V), needed wiring is assy.4366.

Changes of Control Units for AUTOTERM Flow 5D/B

Dear Partners!

There are small changes that have to be taken into consideration. The changes are connected with generations of Flow 5D/B Control Units that are summarized in the table below.

Generation Heater name Control Unit (factory standard) Direct replacement
BINAR Generation BINAR 5S (diesel, 12V) assy.3133 3133->4311->4381
BINAR 5S (diesel, 24V) assy.3108 3108->4306->4388
BINAR 5S (petrol, 12V) assy.3188 3188->4337->4377
1st Flow Generation AUTOTERM Flow 5D, 12V assy.4311 4311->4381
AUTOTERM Flow 5D, 24V assy.4306 4306->4388
AUTOTERM Flow 5B, 12V assy.4337 4337->4377
2nd Flow Generation AUTOTERM Flow 5D, 12V assy.4381*
AUTOTERM Flow 5D, 24V assy.4388
AUTOTERM Flow 5B, 12V assy.4377*

*Only these Control Units work with Pierburg, but they work also with Bosch PAD.

The 2nd Generation of Flows changed the Liquid Pump from Bosch PAD to Pierburg (assy.926).

The Control Units from the BINAR and 1st Generations of Flow heaters use wiring assy.4044.  It is possible to use assy.4044 (and Bosch PAD) for the 2nd Generation as well, but to use the Pierburg liquid pump (that is suitable to 2nd Generation Flows only with voltage 12V), needed wiring is assy.4366.

New Engine preheater AUTOTERM 30SP-24

AUTOTERM offers a new powerful liquid heater – AUTOTERM 30SP-24.

The maximum heater power is 30 kW. This diesel heater is designed for large vehicles and heating systems with a minimum fluid volume of 20 liters. Since the heater is designed for large vehicles, it is only available in the 24 V version.

You can start the heater with a simple on / off button.

Main characteristics:

– High power 30 kW

– Simple on / off button

– Possibility of autonomous operation of the pump with the heater turned off

– Self-diagnosis with control of mains voltage and automatic shutdown.

–  Stable operation in very severe frosts (-45 ° C / -49 ° F)

1-2

Limited offer

From October 25 to 30, the Autoterm Air 4D + Pu-27 set is only 550 € (the offer is valid for both models – 12 and 24 volts

Also, the Binar compact remained in stock for the price of only 580 € for the diesel version and 480 € for the gasoline

Planar 44 12V + PU-27: https://autoterm.euen/shop/ilmalammittimet/planar-44d-12v-pu-27-set/

Planar 44 24V + PU-27: https://autoterm.euen/shop/ilmalammittimet/planar-44d-24v-ilmalammitin-pu-27-set/

Binar 5C 12V diesel: https://autoterm.euen/shop/moottorinlammittimet/binar-5d-12v-diesel/

Binar 5C 24V diesel: https://autoterm.euen/shop/moottorinlammittimet/binar-5d-24v-diesel/

Binar 5C 12V Bensiini: https://autoterm.euen/shop/moottorinlammittimet/binar-5b-12v-bensiini/

44D_PU-27

13,10,2017

AUTOTERM company would like to inform about changes in heaters sets.

The control panel PU-5 is becoming more popular due to its simplicity and convenience, therefore, the AUTOTERM air heaters will soon be supplied with the mentioned remote control instead of the usual control panels PU-22, which were equipped with PLANAR heaters until today.

Also, the PU-27 control panel with a user-friendly interface and an easily understandable display will be included in the BINAR 5S preheater sets very nearest time instead control panel PU-20.

Full information about PU-5 (assy.3520) and PU-27 (assy.3600) control panel you can find on our website

1310pl 1310bi

New opportunity of connection for Planar 8

Since October, 2016 in PLANAR-8DM-24/12-P the function of connection of the additional equipment (the relay for the additional fan, the gate-type valve to the fuel line, etc.) is added (with the maximum current of consumption 1 А).

For connection of the additional equipment the wire is brought out from the control union of a heater. On this wire the supply voltage from the moment of switching ON until switching OFF of a heater there is. This wire should be connected to the «+» plug of the operating relay coil (the gate-type valve, etc.). To carry out connection according to the scheme of electric connections.

planar-8-%d0%bf%d1%80%d0%b5%d0%bc%d0%b8%d1%83%d0%bc-eng-%d1%81-%d0%b4%d0%be%d0%bf-%d0%bf%d1%80%d0%be%d0%b2%d0%be%d0%b4%d0%be%d0%bc

Insurance

All devices from official resellers covered by insurance during warranty time. Insurance doesn’t cover devices from gray and free markets

preloader